Philips 29PT9021/05

English

Mosaic screen

(for TV sets with the Picture in Picture option)

4Open the door of the remote control.

4Press u.

5A menu line MOSAIC appears on the bottom of the screen. It contains three

functions : Scan, Photo Fin., Strobe.

4Select with the keys Cor Bthe function you want to activate and press OK.

Scan

5A scan of the stored TV channels is performed, starting with the favourite

programme stored under the lowest programme number.

Only TV channels placed in the favourite list are displayed. On the last position,

a live picture is shown of the programme that was displayed before the mosaic

screen was switched on. When you were watching a picture from a peripheral

and your set does not have the pip option, a picture of the following favourite

TV channel appears in the last position.

4Press OK again.

5A following series of stored TV channels from the favourite list is scanned.

Each mosaic picture will contain its identifying programme number and name.

4Select a TV channel with the digit keys.

5The mosaic screen disappears and the selected TV programme is displayed.

4Press uto interrupt the scan function and to switch off the mosaic screen.

Never perform a scan while recording a TV programme with a video recorder

recording from EXTERNAL 1or 2since the scan will be recorded on tape.

Photo Finish

5The main picture is displayed in successive frozen pictures.

The last picture on the bottom right will remain live.

4Press OKagain.

5A new photo finish picture is displayed, overwriting the old one.

4Press uto switch off the photo finish function and the mosaic screen.

Strobe

5The picture is reproduced image by image. So you get an interrupted

movement.

4Press OK again.

5The picture is reproduced image by image at a faster speed.

4Press uto switch off the strobe function and to switch off the mosaic screen.