TOOLS YOU WILL NEED
# 1 Phillips screwdriver Pencil
Ruler or tape measure and
straight edge Carpenter square
(optional)
Tin snips (for cutting
damper, if required) Electric drill with 3⁄16“, 1⁄2“and 5⁄8“
drill bits
Hammer (optional)
Stud finder or
Filler blocks or scrap
wood pieces, if needed
for top cabinet spacing
(used on recessed bottom
cabinet installations only)
Gloves
Saw (saber, hole or keyhole)
Level Duct and masking tape
Installation Instructions
Scissors
(to cut template, if necessary)
Safety goggles
MOUNTING SPACE NOTES:
•The space between the cabinets must be
30“(76.2 cm)wide and free of obstructions.
•If you are going to vent your microwave oven
to the outside, see Hood Exhaust Section for
exhaust duct preparation.
•When installing the microwave oven beneath
smooth, flat cabinets, be careful to follow the
instructions on the top cabinet template for
power cord clearance.
BottomEdge of
CabinetNeeds to
be30w(76.2 cm)
orMore from the
CookingSurface
Backsplash
66w(167.6cm)
orMore from
theFloor to the
Topofthe
Microwave
30“(76.2cm)
2“(5.1 cm)
30“
(76.2cm)
min.
161⁄2“(41.9cm)
13 Maximum (33 cm)
“
As a guide to installation, see page 24 for Mo unting
Template Information.
•
•
Cabinet
Cabinet
If the cabinet depth including the cabinet doors
is more th n 13'""' th n the unit must be spaced
out from wall using adequate materials supporting
150 Ibs to allow proper top vent air exhaust.
ae
EN-5