24
Y
our television comes with an on-screen
clock. During normal operation, the clock
appears on the screen when the STATUS/EXIT
button is pressed or if the TIMER DISPLAY
control is turned ON.
1Press the MENU button on the
remote control to show the onscreen
menu.
2Press the CURSORDOWN once to
highlight FEATURES.
3
Press the CURSORRIGHT and the
menu will shift to the left. TIMER will be
highlighted.
4
With TIMER selected, press the CUR-
SORRIGHT again to shift the display
left and highlight the TIME control.
5
Press the CURSORRIGHT again to
highlight the time indicator area.
6
Press the CURSORLEFT orRIGHT to
select the position or digit you wish to
enter.
7
Press the CURSORUP orDOWN to
select the digits for the time. Orpress the
NUMBERED buttons to enter the cor-
rect time.
8
Press the CURSORRIGHT to move to
the AM or PM position.
9
Press the CURSORUP or DOWN to
set AM or PM.
Press the STATUS/EXITbutton to
remove the menu from the screen.
SETTING THE TV CLOCK USING THE TIMER CONTROL
䡲
PICTURE
SOUND
FEATURES
INSTALL
TIMER
ACTIVE CTRL
AutoLock
CLOSED CAP
FORMAT
FEATURES
TIMER
ACTIVE CTRL
AutoLock
CLOSED CAP
FORMAT
TIME
START TIME
STOP TIME
CHANNEL
ACTIVATE
FEATURES
TIME _ _:_ _ AM
START TIME
STOP TIME
CHANNEL
ACTIVATE
TIMER
TIME 10:30 AM
START TIME
STOP TIME
CHANNEL
ACTIVATE
TIMER
FEATURES
FEATURES
FEATURES
TIME 10:
_ _
AM
START TIME
STOP TIME
CHANNEL
ACTIVATE
TIMER
FEATURES
1
2
7
9
6
10
7,9
3
4
5
6
8
7
Remember, be sure to press 0first and then
the hour number for single-digit entries.
The TV’s clock settings may be lost when the
TV is unplugged (or when AC power to the set
is interrupted).
HELPFUL HINT
10
TIME _ _:_ _ AM
START TIME
STOP TIME
CHANNEL
ACTIVATE
TIMER
FEATURES
NOTE: The TIMER Controls can also be
accessed by pressing the CLOCKbutton
on the remote control. See lower diagram
on this page.