䡲
6
AV 3
AV 2
CVI
AV 1
1
3
4
57
2
6
7
The TV’s audio/video input jacks are for
direct picture and sound connections
between the TV and a VCR (or similar device)
that has audio/video output jacks. Follow the
easy steps below to connect your accessory
device to the AV1 Input Jacks located on the
back of the TV.
1Connect the VIDEO (yellow) cable to
the VIDEOAV 1 in jack on the back of
the TV.
2Connect the AUDIO (red and white)
cables to the AUDIO (left and right)
AV1 in jacks on the rear of the TV.
3Connect the VIDEO (yellow) cable to
the VIDEOOUT jack on the back of
the VCR.
4Connect the AUDIO (red and white)
cables to the AUDIO (left and right)
OUT jacks on the rear of the VCR.
5Turn the VCR (accessory device) and
the TV ON.
6Press the CH+ or – buttons on the
remote control to scroll the channels
and select the AV1 channel. AV1 will
appear in the upper left corner on the
TV screen.
7With the VCR (or accessory device)
ON and a prerecorded tape (CD, DVD,
etc.) inserted, press the PLAYbutton
to view the tape on the television.
USING THE AV 1 INPUT JACKS
Remember to select the AVchannels, use the
CH + or – buttons to scroll the series of
channel below the lowest numbered channel
(gernerally below channel 2).
ccCHECK ITOUT
AUDIO IN
(RED/WHITE)
VCR
(EQUIPPED WITH VIDEO AND
AUDIO OUTPUTJACKS)
VIDEO IN
(YELLOW)
BACK OF VCR
BACK OF TV