6.5 Sound
There is a picture but no sound
•Verify the volume is not set to 0.
•Verify the sound has not been muted with m.
•Verify that all cables are connected properly.
•If no sound signal is detected, the TV automatically switches off the sound. This is proper operation and is not a malfunction.
The sound is poor
•Verify that the sound is set to Stereo.
•Select any of the Smart settings in h> Setup > Smart settings.
The sound comes from one speaker only
• Verify that the Balance is not set to extreme left or right.
Sound delay when a DVD Home Theatre System device is connected
•Read the user manual of the DVD device to adjust the audio sync delay. If you cannot set a delay, switch off HD Natural Motion in h> Setup > Picture > Perfect Pixel HD.