11
Mounting the set
For full details on how to use th e Mounting Kit, please refer to th e printed instruc tions in the Quick Start Guide and Te mpla te.
Warning
Never plug in the AC power cord to t he •
power outlet before ins tallation is comp leted.
Do not use a converter or e xtension cord.
•
Install the set as fa r as possible from so urces of •
interference, s uch as a refriger ator, microwave
oven, fluorescent lamp, et c.
There should be at lea st 2.5” distan ce
•
between the unit and t he wall.

Install remote control battery

Caution
Danger of explosion if bat tery is incorre ctly •
replaced. Replace onl y with the same or
equivalent type.
Risk of explosion! Kee p batteries away fr om
•
heat, sunshine or fir e. Never discard ba tteries
in fire.
Risk of decreased bat tery life! Neve r mix
•
different brands or types of batteries.
Risk of product dama ge! When the remot e
•
control is not used for long pe riods, remove
the batteries.
Note
Batteries contain chemical substances, they •
should be disposed of properly.
Perchlorate Mater ial - special hand ling may
•
apply. See www.dtsc.ca.gov/hazardouswaste/
perchlorate.
FRONT
Use 1/4"
drill
Recommended depth of cabinet
at the rear to allow for connections
FM
Mount it
Ask a friend to help you mount the unit as it is quite heavy.
A
&
Cut the template to fit inside the cabinet.
&
Align the template border marked "FRONT"
along the front edge of your cabinet.
&
Use adhesive tape to fix the template.
&
Drill 1/4 inch holes (size X.X mm diameter,X
inch),as markedXon the template.
&
Remove the template when you finish drilling.
B
Using the spacers
On the spacers,there are 4 pairs of notch length
options.Depending on the thickness of you cabi-
net bottom (with/ without an overhang),these
notch lengths correspond to the 4 notch height in
the space holders,and allow you to adjust to the
best height to help you mount the unit.
&
Measure the height of the cabinet bottom
and/overhang.
&
Turn the spacer counterclockwise to determine
which of the 4 heights is most suitable:High &&
Low
&
Insert the spacers accordingly.
C
&
Manuallyfasten the 4screws down into the
spacer holder holes to mount your set.If the
overhang is more than 1 1/4 inch,use longer
screws (not included).
Tip
– Use a nail to start each drill hole.
– Hold your drill firmly at 90o with the cabinet bottom and drill holes at
low speed.
– Clear wood shavings.
Tip
To prevent damage to your set,do not use an electric drill
to secure screws when mounting!
– Hold the unit horizontally when installing it,since the CD tray may
open if the unit is shaken.
– Use the cable manager to manage excess power cord length.
C
Template
A
L
Spacer
L (Low)))&%
Arrow
B

3 Get started

Caution
Use of controls or adjustm ents or •
performance of proce dures other than he rein
may result in hazardous radiation exposure or
other unsafe operation.
Always follow the instructions in this chapter in sequence.If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the rear of the apparatus. Write the numbers here: Model No. __________________________Serial No. ___________________________

Mounting the set under your

kitchen cabinet

Preparation
Note
Ask a friend or a professi onal personnel to •
safely mount the produ ct under your kitc hen
cabinet.
a. Find a mounting locati on near a wall outlet.b. Use the mounting template t o test the design and thickness of you r kitchen cabinet.c. Decide whether you want t o connect the set with other audio/vi deo equipment.
Template
b
a
English
EN