English
Video Cassette Playback 15
•Other tape playback features are
on pages 29-32.
•If AUTO REPEAT is ON,playback
will begin when you insert a tape,
even when the record tab is
intact. Details are on page 29.
•You must connect the DVD/VCR
to a TV using the audio/video
cables in order to use the VCR
features.These hookups are
explained on pages 9 and 11.
Helpful Hints
Read and follow the steps below to play a tape.
1Turn on the TV.Set it to the correct Video In
channel. (Check your TV owner’s manual for details.)
Details are on page 8.
2Insert a tape in the cassette compartment of the
DVD/VCR.VCR light will appear on the front of the
DVD/VCR.If the tape’s record tab has been removed,
playback will start automatically.
If the DVD/VCR power is already on,press VCR to put the
DVD/VCR in VCR mode if necessary.VCR light will appear
on the front of the DVD/VCR.
●If playback does not start automatically,press VCR,then
press PLAY B.
●Press STOP Cto stop playback.
●Press REW hto rewind the tape.
●After the tape stops, press STOP/EJECT CA on the front
of the DVD/VCR to remove the tape.
1
2
Turn on the TV.
Insert a tape in the
DVD/VCR.
DVDVCR SETUP
INPUT
MENU
REC SPEED MODE
ANGLE SEARCH REPEAT
DISPLAY SUBTITLE ZOOM
TIMER SET
REPEAT
A-B
AUDIO
BACKPAUSESTOP
PLAY
OK
FFW
REW
CLEAR TITLE
DISC
TRACKING
OPEN/CLOSE
12
6
5
4
789
0
+10
3
E8E21UD_EN1.qxd 09.1.23 2:42 PM Page 15