12
English
Firmware upgrade
Occasionally,Philips releases new software (“firmware”) for your unit.
1Connect the power adapter to 4.5V DC on the unit and to the power outlet
(see “Power adapter”).
2Keep MODE pressed for 3 seconds.
➜The type of your unit and the current version
of the firmware are displayed.Upgrade? is
displayed.
3Press 9.
4Visit the PhilipsAudio homepage www.audio.philips.com. Check if there is a
firmware file for your unit and if the firmware version is higher than the current
version of your unit.Download the file and burn it on an 8 cm CD-ROM.
5Insert the CD-ROM into the unit and keep MODE pressed for 3 seconds.
➜Upgrade?is displayed.
6Press 2;:
➜Upgradingis displayed and upgrading star ts.This may take some minutes.
After upgrading is finished,Upgrade complete is scrolled.
➜Wrong upgrade fileis scrolled: Your unit already has the latest firmware
or the downloaded file does not correspond to your unit.
➜Upgrade file defectis scrolled: The upgrade file has been damaged
during the download or when burning the CD-ROM.Download the file
again,burn a new CD-ROM and try again.
➜No upgrade fileis scrolled: No upgrade file was found on the inserted
CD-ROM.
Note:If upgrading is interrupted accidentally, repeat steps 5 and 6 until upgrading
is completed successfully.
General information
ALBUM
ALBUM
SEARCH
PLAY
STOP
DISPLAY
MODE