Before Using
◗Do not use this appliance if your skin is dry,
chappedor if you suffer from skin diseases
or skin irritations such as acne or sunburn.
◗Skin conditions vary throughout the year so
facial skin may be drier and more sensitive
during the winter season. In that case, reduce
your treatment time to less than 1minute.
◗Usingthis appliance should always feel pleasant
on your skin.Do not press the brush against
your skin too hard.
◗When using this appliance on the neckline,
reduce the treatment time as the neckline is
more sensitive than facial skin.
◗For best results,if you wear heavy make up on
your face,it is recommended that you remove
most of it before cleansing with this appliance.
◗Regular cleaning of the appliance ensures
optimal results and longer brush life.
◗Always keep hair away from your face to
prevent the hair from getting tangled in the
brush.
◗Never remove or replace brush heads when
the appliance is on.
◗This appliance is water-resistant and can be
safely used in the shower or bath.
Cleansing
◗The cleansing brush can be used with your
regular facial bar soap or your preferred liquid
cleansing product.
◗The curved surface of this brush follows the
contour of your face,providing gentle and
effective daily cleansing.
◗This appliance is water-resistant so you can
use it in the shower or bath.
1Press the cleansing brush down onto the
connection pin until it locks into position.
You will hear a click (Fig.3).
2Use a headband or hair clips to pull hair
away from your face to prevent your hair
from making contact with the brush.
3Remove any heavy make-up from your face.
4Place a small amount of your favorite
cleansing soap or lotion in your hand and
manually rotate the brush gently in the
lotion so that the brush head bristles are
covered evenly.
◗Ifusing bar soap, dampen the brush head first
with lukewarm water,The water will soften
the soap to evenly cover the brush bristles.
5Place the cleansing brush gently on your face.
6Press the ON button to turn the appliance
on (Fig 4).
7Gently move the brush across your face
making circular movements being careful to
avoid sensitive areas such as the eyes and
lips (Fig 5). Do not press the brush too
hard against your skin.
◗If desired,you can also gently cleanse your
neckline but reduce the cleansing time as the
neckline is more sensitive than facial skin.
8Depending on the sensitivity of your skin,
best cleansing results using this appliance
are usually achieved within 1 to 2 minutes.
Note: Do not cleanse for longer than the
recommended time. Remember that all skin types
are different and cleansing with this appliance
should always be a pleasant beauty routine.
9Press the off button to turn the appliance
off (Fig 6).
10 Rinse your face with lukewarm water to
remove all cleansing residue.
Exfoliating
◗The exfoliating brush can be used with your
regularfacial bar soapor liquidcleansing product.
◗The longer bristles of the brush lift away
impurities and gently exfoliate dead skin cells
providing an effective deep facial cleansing.
◗The neckline skin is more sensitive than facial
skin. Do not use the exfoliating brush around
the neckline as irritation may occur.
1If necessary,first remove the cleansing brush
head from the unit by pulling straight off the
connection pin (Fig 7).
2Press the exfoliating brush down onto the
connection pin until it locks into position.
You will hear a click (Fig 8).
3Use a headband or hair clips to pull hair
away from your face to prevent your hair
from making contact with the brush.
4For best exfoliating results,remove all
make-up and impurities from your face
before using the exfoliating brush.
5Moisten your face with lukewarm water
and apply your favorite scrubbing cleanser
directly on your face avoiding the sensitive
areas around eyes and lips.
◗If you prefer to exfoliate with cleansing cream,
put a small amount of cream or cleansing
cream in the palm of your hand. Dampen the
brush with lukewarm water and manually
rotate the brush gently in the cream so that
the brush head bristles are covered evenly.
◗You can also apply cleansing cream directly
to the exfoliating brush.First dampen the brush
head with lukewarm water and then apply a
small amount of cleansing cream evenly on the
brush head bristles.
6Placethe exfoliating brush gently on your face.
7Press the ON button to turn the appliance
on (Fig 4).
8Gently move the brush across your face
making circular movements while being
careful to avoid sensitive areas such as the
eyes and lips (Fig 5). Do not press brush
too hard against your skin.
9Depending on the sensitivity of your skin,
best exfoliating results using this appliance
are usually achieved within 1 to 2 minutes.
Note: Do not exfoliate for longer than the
recommended time.Remember that all skin types
are different and exfoliating with this appliance
should always be a pleasant beauty routine.
10 Press the off button to turn the appliance
off (Fig 6).
11 Rinse your face with lukewarm water to
remove all cleansing residue.
Cleaning and Storage
◗For best results,clean the appliance and brush
heads after each use.
◗Never remove or replace brushes while the
appliance is turned on.
◗Do not apply pressure or hard objects to brush
heads as this may damage the brush heads and
reduce cleansing effectiveness.
◗All parts can be washed in warm water.Never
use any other cleaners such as alcohol,acetone,
abrasive cleaning solutions,as it could cause
damage to the appliance and brushes.
◗When not in use,keep the appliance and
brushes in the storage stand. You may also
keep the appliance and brushes in the storage
stand in the shower and tub area.
1Rinse the inside of the brush heads by
running under warm tap water (Fig 9).
You can also rinse this appliance under warm tap
water.
2Rinse the outside of the brush heads by
running under warm tap water (Fig 10).
3Turn the appliance ON and rinse any cleaning
soap or lotion residuals from the connection
pin (Fig 11).
4Dry the appliance and brush heads with a
soft towel being careful not to bend the
brush bristles.
5Place the clean,dry appliance in the storage
stand.Leave one brush attached to the
appliance and place the second brush onto
the pin on the back part of the stand (Fig.12).
Clean the stand occasionally with a soft cloth and
warm water.
Brush Head Maintenance
◗Clean the brush heads after every use for
optimal performance (see “Cleaning”).
◗When not in use,keep the appliance and brush
heads in the storage stand.
◗Do not use this appliance with a damaged or
broken brush.Replace brush head immediately.
◗With regular use,your brushes should be
replaced every three to six months.
Replacement brush heads may be purchased
from the website,www.norelco.com.
◗If the brush head bristles appear bent or
distorted after use,simply rinse under warm
tap water to return them to the original shape.
◗If the brush head bristles do not return to their
original shape after rinsing under water,replace
the brush immediately.
Using a damaged or worn brush head may irritate
your skin.
This appliance has no other user-serviceable parts.
Any other service should be performed by an
Authorized Norelco Service Location.
Assistance
For assistance or the Authorized Norelco Service
Location nearest you,call toll free:
1-800-243-3050
or visit our website:www.norelco.com
Authorized Norelco Service Location information
is available 24 hours a day,7 days a week.
Accessories
◗Replacement Cleansing Brush
Model HP5950 - For optimal cleansing results,
replaceyour cleansingbrush every 3to 6 months.
◗Replacement Exfoliating Brush
Model HP5951 - For optimal exfoliating results,
replaceyour exfoliating brush every 3to 6
months.
◗Norelco Accessories may be purchased at an
Authorized Norelco Service Location or on
our website www.norelco.com
6
21
3 4
5
12
87
910
11
Visapure_10XX05 1/18/06 12:09 PM Page 2 (Black plate)