MSDS -- ALTO‘ Fluorescent Lamps HL and KB
|
| Page 2 of 4 |
SECTION 2: HAZARDOUS INGREDIENTS(cont'd) |
| |
OSHA (PEL) | ACGIH (TLV) | % by Wt. |
mg/m3 | mg/m3 TWA |
|
If Spec or Ultralume, may have some of the above, but main phosphor components are listed
below: |
|
|
|
Cerium Magnesium Terbium |
|
|
|
Aluminate† | N/A | 10 | Approx .25% |
Barium Magnesium aluminate† | N/A | 10 | Approx .5% |
Yttrium Oxide | 1.0 | 1.0 | Approx .5% |
Mercury | .1 | .025 | < than 20 ppm |
†PEL & TLV are given for magnesium, aluminum oxide, and yttrium. Barium aluminate is not a soluble compound.
SECTION 3: CHEMICAL/PHYSICAL DATA
Not applicable. This item is a light bulb 4 ft. long, 1.5 inches in diameter. The bulb is glass, the base is a coated aluminum. The coating is inert.
SECTION 4: FIRE AND EXPLOSION DATA
FIRE AND EXPLOSION DATA NOT APPLICABLE
SECTION 5: REACTIVITY DATA
Stability: | Lamp is stable. |
Polymerization: | Not applicable. |
Incompatibility: Glass will react with Hydrofluoric Acid.