For wet and moist materials, the range loss may be up to 100%.
Features
adjustable loudspeaker volume
You can change the volume on the parent unit, so you can adjust to suit your surroundings.
1 Turn the volume dial on the right side of the parent unit until the desired loudspeaker
volume for the parent unit has been reached (Fig. 8).
Note: Whilst operating on batteries, if the volume is set to a high level, the parent unit will consume more
power.
talk function
The baby unit has a talk function that enables older children to talk through the baby unit to the
parent unit.
1 Set the on/off switch of the baby unit to ‘off’.
2 Switch the parent unit on. Select a volume level of 4-5.
3 When your child wants to talk to you, he or she only has to press the talk button on the
baby unit and speak clearly into the microphone.
Cleaning and maintenance
Do not immerse the parent unit or the baby unit in water and do not clean them under the tap.
Do not use cleaning spray or liquid cleaners.
1 Unplug the baby unit or the parent unit if they are connected to the mains.
2 Clean the parent unit and the baby unit with a damp cloth.
Make sure the units are dry before you connect them to the mains.
3 Clean the adapters with a damp cloth.
Storage
When you are not going to use the baby monitor for some time, remove the non-rechargeable
batteries from the baby unit and parent unit. Store the baby unit, the parent unit and the adapters in
a cool and dry place.
Replacement
Baby unit
Batteries
Only replace the non-rechargeable batteries of the baby unit with four 1.5V R6 AA batteries.
Note: We strongly advise you to use Philips non-rechargeable batteries.
adapter
Only replace the adapter of the baby unit with an adapter of the original type.You can order a new
adapter from your dealer or a Philips service centre:
SBC CS0920/00W (EU/SGP only)
SBC CS0920/05W (UK only)
9VD200 (AU/NZ only)
-
-
-
EngliSh 9