33
ANT "A"
75Ω
L
AUDIO
R
AV
VIDEO
S-VIDEO 1
PIP ANT "B"
75Ω
SURROUND SOUND
88
+ R – – L +
ATTENTION - TO AVOID DAMAGE
1. DO NOT CONNECT SURROUND SOUND SPEAKERS
TO A SEPARATE AMPLIFIER OR TO SPEAKERS
CONNECTED TO ANOTHER PRODUCT.
2. DO NOT CONNECT LEFT AND RIGHT SPEAKER
OUTPUT TOGETHER. S-VIDEO 2
out
AV2
in
AV1
in
LOCATOR POWER
AV ON/OFF POSITION FREEZE
TV
VCR
ACC
SWAP SOURCE PIP CH
UP DN
SMART
SOUND
SMART
PICTURE
MENU SURF
VOL CH
MUTE
CC STATUS CLOCK A/CH
EXIT TV/VCR
SLEEP TUNER
VCR
RECORD
A/B
MULTI
MEDIA
INCREDIBLE
STEREO
24
4
AV 1
AV 2
1
3
2
AUDIO OUT
R L
S-VIDEO
OUT
ANT/CABLE
OUT
The S(uper)-Video connection on
the rear of the television can give
you better picture detail and
clarity, for the playback of S-
VHS VCR tapes, or Digital Video
Discs than the normal antenna
picture connections.
Note: The accessory device being
used must have a S-Video Output
to complete this connection.. The
following steps show the connec-
tions to the S-VIDEO1 and AV 1
input jacks. To hookup an addi-
tional device to S-VIDEO2 and
AV2 input jacks, repeat the pro-
cedure.
Connect the S-VIDEO
CABLE to the S-VIDEO 1 input
jack on the rear of the television,
then the AUDIO (red and white)
to the AUDIO IN (AV1) jacks
on the rear of the TV.
Connect the S-VIDEO
CABLE to the S-VIDEOoutput
jack on the accessory device.
Then connect the red and white
AUDIOCABLES to the AUDIO
(left and right) output jacks on
the rear of the accessory device.
Turn the VCR (orDigital
Video Disc Player) ON.
Press the AVbutton on the
remote to tune to the SVID-R
channel. You are now ready to
view the tape or disc on the TV.
AUDIO IN
(RED/WHITE)
HOW TO USE THE AUDIO/VIDEO INPUT JACKS
BEGIN
S-VIDEO CABLE
(NOTSUPPLIED)
DBS, DVD, Video Game, etc.
(EQUIPPED WITH S-VIDEO AND
AUDIO OUTPUTJACKS)
BACK OF ACCESSORY
S-VIDEO INPUT
BACK OF TV
NOTE: Repeatedly pressing the AV
button on the remote will toggle the
picture source from the current chan-
nel, to the last channel viewed, then
to the AV1 connection, then to the
AV2 connection.
This also applies to the Multi Media
button on the remote. Repeatedly
pressing the Multi Media button will
toggle the picture source from the
current channel to the last viewed
channel, then to the MM 1 (AV1)
connection, then to the MM 2 (AV2)
connection.
When using the S-VIDEO1 and AV1 Audio input jacks, the video and
sound can be viewed and heard on the AV1 channel.
When using the S-VIDEO 2 and AV2 Audio input jacks, the video and
sound can be viewed and heard on the AV2 channel.
IF YOU ARE USING A
MONO DEVICE, USE
ONLYTHE AUDIO R
JACK.