7
Hum: Check for faulty phono connecting cable. Try to separate phono cables from power cords (they can
induce hum into the system). If that doesn't work we recommend you turn off your subwoofer when it is not
in use. This is most easily accomplished by either connecting its powercord to a switched power outlet on
the back of your receiver (if it has them) or by using a Remote Controlled Switched Outlet like Radio Shack
part #61-2667.
SubsonicTM
, Baby BoomerTM
, Baby Boomer PlusTM
, Digital SubTM
600 & SupersonicTM
Specifications:
Woofer(s) :
SubsonicTM
: (2) 6.5" heavyweight fibercone woofers 2" voice coils and 30-ounce magnets
Baby BoomerTM
& Baby Boomer PlusTM
: (2) 8" heavyweight fibercone woofers with rubber surrounds,
2" voice coils and 40-ounce magnets
Digital SubTM
600 & SupersonicTM
: (2) 12" heavyweight polycone woofer with rubber surrounds,
2” voice coils and 40-ounce magnets
Subwoofer Low End Frequency Response: SubsonicTM
: -3 dB @ 28 Hz
Baby BoomerTM
& Baby Boomer PlusTM
: - 3 dB @ 27 Hz
Digital SubTM
600 & SupersonicTM
: - 3 dB @ 23 Hz
Variable Subwoofer Low Pass Filter: Fourth Order from 50 - 150 Hz
System: SubsonicTM
& Baby BoomerTM & Baby Boomer PlusTM - Acoustic Suspension / Bipole Configuration
Digital SubTM
600 & SupersonicTM- Compound Compression
Dimensions: SubsonicTM
: 7 7/8" wide x 7 7/8" high x 7 7/8" deep (without grills)
Baby BoomerTM& Baby Boomer PlusTM
: 9 7/8" wide x 9 7/8" high x 9 7/8" deep (without grills)
Digital SubTM
600 & SupersonicTM
: 14 1/4" wide x 15" high x 15" deep (with grill)
Weight: SubsonicTM- 22 lbs. / Baby BoomerTM
& Baby Boomer PlusTM- 30 lbs.
Digital SubTM
600 & SupersonicTM- 50 lbs.
Amplifier Power: SubsonicTM - 350 Watts
Baby BoomerTM
& Digital SubTM
600 - 600 Watts
Baby Boomer PlusTM
& SupersonicTM- 800 Watts
Power Requirements: AC 120 V, 60 Hz, 800 Watts Maximum