Quick surround sound setup03
12
En
Chapter 3:
Quick surround sound setup
Automatically setting up for
surround sound (MCACC)
The Auto Multi-Channel Acoustic Calibration
(MCACC) setup measures the acoustic
characteristics of your listening area, taking
into account ambient noise, speaker size and
distance, and tests for both channel delay and
channel level. After you have set up the
microphone provided with your system, the
receiver uses the information from a series of
test tones to optimize the speaker settings
1
and equalization for your particular room.
Important
• The Auto MCACC Setup will overwrite any
existing speaker settings you’ve made.
•Make sure the headphones are unplugged.
Caution
• The test tones used in the Auto MCACC
Setup are output at high volume.
1 Connect the microphone to the MCACC
SETUP MIC
jack on the front panel.
Make sure there are no obstacles between the
speakers and the microphone.
If you have a tripod, use it to place the
microphone so that it’s about ear level at your
normal listening position. Otherwise, place the
microphone at ear level using a table or a chair.
2If the receiver is off, press
RECEIVER
to
turn the power on.
3
If you have a subwoofer, turn it on.
4 Press
RECEIVER
on the remote control,
then press the
SYSTEM SETUP
button.
• Press
SYSTEM SETUP
again at any time to
exit the System Setup menu.
2
5Select ‘A. MCACC’ from the System Setup
menu then press
ENTER
.
6 Make sure ‘SB NORM.’ is selected then
press ENTER.
3
Try to be as quiet as possible after pressing
ENTER
. The system outputs a series of test
tones to establish the ambient noise level.
Note
1If you are planning on bi-amping your front speakers, or setting up a separate speaker system in another room, read through
Surround back speaker setting
on page 43 and make sure to connect your speakers as necessary before continuing.
RECEIVER
MULTI CONTROL
SOURCE
INPUT
SELECT
DVD/LD TV/SAT DVR/VCR TV CONT
CD
CD-R/TAPE
TUNER RECEIVER
+
10
FL DIMMER SR DISC
ENTER
TV CONTROL
VOL
ST ST
INPUT
SELECT TV CH
TV VOL
ENTER
D.ACCESS
TOP MENU
DTV MENU
CLASS
MENU
BAND
RETURN
GUIDE
T.EDIT
SYSTEM
SETUP
TUNE
TUNE
2The receiver will automatically exit the current menu after three minutes of inactivity. If you cancel the Auto MCACC Setup at
any time, the receiver automatically exits and no settings will be made.
3If you are planning on bi-amping your front speakers, or setting up a separate speaker system in another room, read through
Surround back speaker setting
and make sure to connect your speakers as necessary before continuing.
T
DIGITAL IN
RSETUP MIC
MCACC
UPDOWN
MASTER
VOLUME
TUNER AUX
VSX_815-915.book.fm 12 ページ ２００４年１２月８日 水曜日 午後４時３分