#Onlywhen the tuner has been tuned in to an
HDRadio broadcasting, display can be changed.
#Whenthe tuner has been tuned in to an HD
Radiobroadcasting, default display is changed
intostation name instead of frequency.
Introductionof advanced tuneroperation
1 TouchAV Menu and then touch
FunctionMenu to display the function
names.
Thefunction names are displayed and oper-
ableones are highlighted.
2 TouchESC to return to the frequency
display.
#Toreturn to the previous display, touch Back.
Storing the strongestbroadcastfrequencies
Theoperation is the same as that of the tuner.
(Referto Storing the strongest broadcast fre-
quencieson page 19.)
Tuningin strong signals
Localseek tuning lets you tune in only those
radiostations with sufficiently strong signals
forgood reception.
1 TouchLocal on the function menu.
2 Touch donLocal to turn on.
#Toturn off, touch c.
3 Touchcor don Level to select the de-
siredlevel.
1234
Largersetting number is higher level. The
highestlevel setting allows reception of only
thestrongest stations, while lower settings let
youreceive progressively weaker stations.
Switching the seek mode
Thereare two method of seek tuning settings,
oneis HD (Digital broadcasting stations seek)
andthe other is All (normal seek).
%TouchSeek on the function menu to se-
lectyour favorite setting.
AllHD
Switching the receptionmode
Ifa digital broadcast reception condition gets
poor,this unit automatically switches to the
analogbroadcast of the same frequency level.
Ifthis function is set to D/A Auto, the tuner
switchesbetween digital broadcast and ana-
logbroadcast automatically. If this function is
Analog,reception will be conducted within an
analogbroadcast.
%TouchBlending on the function menu
toselect your favorite setting.
D/AAutoAnalog
Note
IfSeek is set to HD and Blending is set to
Analog,the tuner can not receive broadcasts. In
thiscase, the seek mode or reception mode is
changedautomatically as follows:
!WhenSeek is set to HD, if you switch
Blendingfrom D/A Auto to Analog,Seek is
changedto All.
!WhenBlending is set to Analog, if you switch
Seekfrom All to HD,Blending is changed to
D/AAuto.
Available accessories
En
72
Section
19