Pioneer AVIC-N5 operation manual Memory Navi Mode, Navigation in the memory navi, 158 En

Appendix

Appendix

2 Press MENU button to change to AV	Memory Navi Mode
Source screen.	While the DVD Map Disc is inserted, you can
3 Press and hold MENU button for two	store the data on the DVD Map Disc into the
seconds or more.	memory of the navigation system. If the DVD
The 4-point touch panel adjustment screen ap-	Map Disc is removed from the navigation sys-
pears.	tem after the data is stored, navigation is per-
4 Touch and hold the arrows that point	formed using the data in the memory
	(memory navi mode). In the memory navi
to the corners of the LCD screen with the	mode, you can play a music CD or DVD-Video
stylus.	on the navigation system while navigation is
The red arrow indicates the order.	taking place.
	The operation is automatically switched to the
	memory navi mode when the DVD Map Disc
	is removed from the navigation system.
	Navigation in the memory navi
	mode

5 Press MENU button.

The adjusted position data is saved.

pDo not turn off the engine while saving the

adjusted position data.

pPress MENU button to complete the 4-point

adjustment.

pTo cancel the adjustment, press and hold MENU button.

6 Press MENU button.

The 16-point touch panel adjustment screen appears.

7Gently touch the center of + mark dis- played on the screen with the touch panel adjustment pen.

After you touch all marks, the adjusted posi- tion data is saved.

p Do not turn off the engine while saving the adjusted position data.

p Press MENU button to return to the pre- vious adjustment position.

8Press and hold MENU button.

The adjustment is complete.

pIf touch panel adjustment cannot be per-

formed properly, consult your local Pioneer dealer.

During the memory navi mode, navigation is performed only using the data read into the memory. Therefore, some functions are re- stricted compared with navigation using the DVD Map Disc (DVD navi mode). These func- tion buttons, which cannot be used in the memory navi mode, are indicated in light gray. (If you want to use these functions, please in- sert the DVD Map Disc again.) In addition, you may need to insert the DVD Map Disc and store new data in the memory during naviga- tion operation, such as when the destination is far away.

The memory navi mode uses the following map data to perform navigation.

The following are collectively known as Mem- ory Data:

!Manually downloaded memory area data in [Map in Memory] of the Settings menu (Manual downloaded Memory Area)

!Automatically downloaded memory data of

the surrounding areas during the route search (Auto downloaded Memory Area)

=For details concerning operations, refer to Defined Locations on page 83.

158 En