Using the radio (AM)
Using the touch panel keys
1
5
4 3
2
Chapter
15
)AM( radio the Using
1Performs manual tuning
To tune manually, touch [o] or [p] briefly. The frequencies move up or down one step at a time.
Performs seek tuning
To perform seek tuning, touch and hold [o] or [p] for about one second and then re- lease. The tuner will scan frequencies until a broadcast strong enough for good reception is found.
p You can cancel seek tuning by touching either [o] or [p] briefly.
p If you keep holding [o] or [p], you can skip broadcasting frequencies. Seek tuning will start at the time you re- lease the keys.
2Selects a preset channel
The keys can be used to switch preset chan- nels.
Scroll by dragging the keys up or down to dis- play the preset channel you want to select, and tap the channel.
p The lower keys and the upper keys ap- pear only when the preset channel is se- lected.
3Recalls equalizer curves
=For details, refer to Using the equalizer
4Displays the “Function” menu
=For details, refer to Using advanced func- tions on the next page.
5Switches between the AV operation screen and the preset list display
You can switch the screen display according to your preference.
=For details of the operation, refer to Switching between the AV operation screen and the list screen on page 70.
Storing and recalling broadcast frequencies
With a tap of any of the preset tuning keys (“P1” to “P6”), you can easily store up to six broadcast frequencies for later recall (also with the tap of a key).
1Select a frequency that you want to store in memory.
En 
77