Playing tracks and outputting the sound

The following describes the procedure for outputting the channel 1 sound as an example.

!Set the volume of the devices (power amplifier, powered speakers, etc.) connected to the [MASTER OUT 1] and [MASTER OUT 2] terminals to an appropriate level. Note that loud sound will be output if the volume is set too high.

c

d

4

5

e

6

7

8

9

a b

f

3CD, USB selector switch4TRIM control5ISO (HI, MID, LOW) controls6Headphones CUE button7Channel fader8HEADPHONES MIXING control9HEADPHONES LEVEL controlACrossfader assign selector switchBCrossfaderCMASTER LEVEL controlDMASTER CUE buttonEBOOTH MONITOR controlFCROSS FADER CURVE selector switch
1 Set the positions of the controls, etc., as shown below.

Names of controls, etc.

Position

 

MASTER LEVEL control

Turned fully counterclockwise

 

CD, USB selector switch

[USB] position

Operation

TRIM control

Turned fully counterclockwise

 

ISO (HI, MID, LOW) controls

Center

 

Channel fader

Moved forward

 

Crossfader assign selector switch

[THRU] position

 

2 Press the [f] button to play the track.3 Turn the [TRIM] control.

Adjust the [TRIM] control so that the channel level indicator’s orange indicator lights at peak level.

4Move the channel fader away from you.5Turn the [MASTER LEVEL] control to adjust the audio level of the speakers.

Adjust the sound level output from the [MASTER OUT 1] and [MASTER OUT 2] terminals to an appropriate level.

Monitoring sound with headphones

Set the positions of the controls, etc., as shown below.

Names of controls, etc.

 

Position

HEADPHONES MIXING control

 

Center

 

 

 

 

HEADPHONES LEVEL control

 

Turned fully counterclockwise

1Press the headphones [CUE] button for the channel 1.2Turn the [HEADPHONES LEVEL] control.

Adjust the sound level output from the headphones to an appropriate level.

Note

This unit and the Serato DJ software include a variety of functions enabling individualistic DJ performances. For details on the respective functions, see the Serato DJ software manual.

!The Serato DJ software manual can be downloaded from “Serato.com”. For details, see Downloading the Serato DJ software manual (p. 6).

Quitting the system

1 Quit [Serato DJ].

When the software is closed, a message for confirming that you want to close it appears on the computer’s screen. Click [Yes] to close.

2Press the [u] switch on this unit’s rear panel to set this unit’s power to standby.

3Disconnect the USB cable from your computer.

En 15