Section

 

 

 

 

 

02

 

 

Operating this unit

 

 

 

 

 

! When AMBIENT is selected, the system au-

2

Turn M.C. to display BOTH COLOR and

 

 

 

 

 

 

 

tomatically cycles through the ambient col-

press to select.

 

 

 

ors.

 

 

 

 

 

! When CALM is selected, the system auto-

3

Turn M.C. to select the illumination color.

 

 

 

matically cycles through the calm colors.

You can select one option from the following list.

 

 

! When CUSTOM is selected, the customized

 

! 30 preset colors (WHITE to ROSE)

 

 

 

color saved is selected.

 

! SCAN (cycle through all colors)

!To cancel selecting the illumination color,

 

press

.

4 Press M.C. to confirm the selection.

Selecting the display color from

Notes

 

! You cannot select 3 sets of preset colors and

the illumination color list

CUSTOM in this function.

Only for DEH-3400UB and DEH-34UB.

! Once you select a color in this function, col-

You can select the desired colors for the display

ors on the keys and display of this unit auto-

of this unit.

 

matically switch to the color you selected.

1

Press

.

! For details about colors on the list, refer to

Selecting the key color from the illumination

2 Turn M.C. to display DISP COLOR and

color list on the previous page.

 

 

press to select.

Customizing the illumination color

3 Turn M.C. to select the illumination color.

Only for DEH-3400UB and DEH-34UB.

 

 

You can select one option from the following list.

1 Press

.

 

! 30 preset colors (WHITE to ROSE)

 

 

 

 

!

SCAN (cycle through all colors)

2 Turn M.C. to display KEY COLOR or

 

!

3 sets of colors (WARM, AMBIENT, CALM)

 

DISP COLOR. Press to select.

 

!

CUSTOM (customized illumination color)

 

 

 

4 Press M.C. to confirm the selection.

3 Press M.C. and hold until the customizing

illumination color setting appears in the dis-

 

 

 

 

Note

 

 

play.

 

For details about colors on the list, refer to Se-

4 Press M.C. to select the primary color.

lecting the key color from the illumination color

list on the previous page.

R (red)—G (green)—B (blue)

Selecting key and display color

5 Turn M.C. to adjust the brightness level.

from the illumination color list

Adjustment range: 0 to 60

# You cannot select a level below 10 for all three of

Only for DEH-3400UB and DEH-34UB.

R (red), G (green), and B (blue) at the same time.

You can select the desired colors for the keys

# You can also perform the same operation on

and display of this unit.

other colors.

 

 

 

 

 

 

1

Press

.

 

 

Operating this unit

Notes

!You cannot create a custom illumination color when SCAN or a set of colors (WARM, AMBIENT, or CALM) is selected.

!You can create custom illumination colors for both KEY COLOR and DISP COLOR.

Switching the dimmer setting

You can adjust the brightness of illumination.

%Press and hold.

Using an AUX source

1Insert the stereo mini plug into the AUX input jack.

2Press SRC/OFF to select AUX as the source.

Note

AUX cannot be selected unless the auxiliary setting is turned on. For more details, refer to AUX (auxiliary input) on the previous page.

Turning the clock display on or off

%Pressto turn the clock display on or

off.

# The clock display disappears temporarily when you perform other operations, but the clock display appears again after 25 seconds.

10En