Operating this unit
Section
02
6Song time (progress bar)
7Play time indicator
8Voltage indicator
Shows the battery voltage.
!The level displayed on the voltage indi- cator may differ from the actual voltage level.
Opening the front panel
1Press the open button. Disc loading slot appears.
Playing a
1Insert the disc into the disc loading slot with the label side up.
Ejecting a
1Press h (eject).
Playing songs on a USB storage device
1Use a Pioneer USB cable to connect the USB sto-
rage device to the unit.
!Plug in the USB storage device using the USB cable.
Stopping playback of files on a USB storage device
!You may disconnect the USB storage device at any time.
Playing songs on an SD memory card
1Remove the front panel.
For details, refer to Removing the front panel to protect your unit from theft on page 9.
2Insert an SD memory card into the SD card slot. Insert it with the contact surface facing down, and press on the card until it clicks and comple- tely locks into place.
3
4Press SRC/OFF to select SD as the source. Playback will start.
Stopping playback of files on an SD memory card
1Remove the front panel.
For details, refer to Removing the front panel to protect your unit from theft on page 9.
2Press on the SD memory card until it clicks. The SD memory card is ejected.
3Pull out the SD memory card.
4
Selecting a folder
1Press or .
Selecting a track
1Turn LEVER.
Fast forwarding or reversing
1Turn and hold down LEVER to the right or left.
Returning to root folder
1Press and hold BAND/.
Switching between compressed audio and
1Press BAND/.
Switching between playback memory devices
You can switch between playback memory devices on USB storage devices with more than one Mass Storage
1Press BAND/.
!You can switch between up to 32 different mem- ory devices.
Notes
!When playing compressed audio, there is no sound during fast forward or reverse.
!Disconnect USB storage devices from the unit when not in use.
!If there are two USB storage devices con- nected to this unit, the device connected to the input of the selected source is the one that is operated.
!Disconnect communications for the USB sto- rage device before switching to operation of the other device.
Displaying text information
Selecting the desired text information
1Press /DISP.
Notes
!Depending on the version of iTunes used to write MP3 files to a disc or media file types, in- compatible text stored within an audio file may be displayed incorrectly.
!Text information items that can be changed depend on the media.
Selecting and playing files/ tracks from the name list
If there are external storage devices (USB, SD) connected to the unit, this function is only available when Music browse is set to OFF. Refer to Music browse (music browse) on page 35.
1Press (list) to switch to the file/track name list mode.
unit this Operating
En 13