Section

Available accessories

03

Switching the SIRIUS display

1Press/DISP/SCRL.

Play time—Channel number—Channel name— Category name—Artist name—Song title/pro- gram title—Composer name

!Play time is displayed during the Instant Re- play mode. Refer to Using Instant Replay function on the next page.

!Play time display indicates the time inverted from the live broadcast. Play time is displayed in negative number.

Displaying the Radio ID

1Push M.C. left or right to select CH 000.

!To select CH 000, set the channel select setting to CH number. About the channel select setting, refer to Selecting the SIRIUS channel select mode on this page.

Note

It may take a few seconds before you can hear anything while this unit acquires and processes the satellite signal when you change the source to SIRIUS tuner or select a channel.

Storing and recalling broadcast stations

You can easily store up to six stations for each band as presets.

!Six stations for each band can be stored in memory.

1 Press /LIST.

Preset screen is displayed.

2Use M.C. to store the selected station in memory.

Turn to change the preset number. Press and hold to store.

The SIRIUS preset number you have selected will flash and then remain lit. The selected sta- tion has been stored in memory.

3Use M.C. to select the desired station.

Turn to change the station; press to select.

# You can also change the station by pushing M.C. up or down.

Advanced operations using special buttons

Selecting the SIRIUS channel select mode

1Press S.Rtrv/SAT repeatedly to select the desired channel select setting.

CH number (channel number select setting)— Category (channel category select setting)

Pause

During the Instant Replay mode, you can select Pause (pause). Refer to Using Instant Replay function on the next page.

Press 6/PAUSE to pause or resume.

Function and operation

1Press M.C. to display the main menu.

2Use M.C. to select FUNCTION.

The function selection menu is displayed. Turn to change the menu option. Press to select.

3 Turn M.C. to select the function. After selecting, perform the following procedures to set the function.

CH select (channel select mode setting)

You have two methods for selecting a channel: by number and by category. When selecting by number, channels in any category can be selected. Select by category to narrow your search down to only channels in a particular category.

1Press M.C. to change the channel select mode. CH number (channel number select setting)— Category (channel category select setting)

G-Alert (game alert setting)

English

En 19