Tuner
Introduction of advanced tuner operation
1
1Function display Shows the function status.
1Press
FUNCTION, AUDIO and ENTERTAINMENT appear on the display.
2Use
FUNCTION.
Turn to change the menu option; press to se- lect.
The function name appears on the display.
3Turn
Turn
PTY Search (program type selection)— Traffic ANNOUNCE (traffic announcement
program interruption)
# You can also switch between the functions in reverse order by turning
terclockwise.
# To return to the frequency display, press
BAND.
# If MW/LW band is selected, you can only se- lect BSM or Local.
| Section |
| 04 |
| English |
Note |
If you do not operate the function within about 30 seconds, the display is automatically returned to the frequency display.
Storing broadcast frequencies
You can easily store up to six broadcast fre- quencies for later recall.
1When you find a station that you want to store in memory, turn
2Use
Turn to change the preset number; press and hold to store.
The number you have selected will flash in the preset number list and then remain lit. The se- lected radio station frequency has been stored
in memory.
# If you do not operate the list within about 30 seconds, the preset channel list mode is can- celed automatically.
Notes
!Program service name is not displayed unless the radio receives the frequency.
!Up to 18 FM stations, six for each of the three FM bands, and six MW/LW stations can be stored in memory.
!You can also store a broadcast frequency in
memory pressing
En 17