Section

 

 

 

 

02

 

 

Using this unit

 

 

 

Starting procedure for iPhone users

 

 

 

 

 

 

 

 

 

 

Using this unit

 

 

PAUSE (pause)

1 Connect an iPhone to USB input.

 

1 Press M.C. to pause or resume.

 

 

2 Switch the source to APP.

 

S.RTRV (sound retriever)

3 Start up the application on the iPhone

 

1 Press M.C. to select the desired setting.

and initiate playback.

 

1—2—OFF (off)

Basic operations

 

1 is effective for low compression rates, and 2

 

is effective for high compression rates.

 

 

 

Selecting a track

 

Audio adjustments

1 Press c or d.

 

Fast forwarding or reversing

 

1 Press M.C. to display the main menu.

1 Press and hold c or d.

 

 

 

 

 

2 Turn M.C. to change the menu option

Pausing playback

 

1 Press BAND/ to pause or resume.

 

and press to select AUDIO.

 

 

 

 

3 Turn M.C. to select the audio function.

Switching the display

 

 

Once selected, the following audio functions

 

 

can be adjusted.

Selecting the desired text information

 

! FADER is not available when SUB.W/SUB.W

1 Press DISP to cycle between the following:

 

is selected in SP-P/O MODE. For details, refer

! TRACK INFO (track title/artist name/album

 

to SP-P/O MODE (rear output and preout set-

title)

 

ting) on page 12.

! APP NAME (application name)

 

! SUB.W and SUB.W CTRL are not available

! ELAPSED TIME (playback time)

 

when REAR/REAR is selected in

! CLOCK (source name and clock)

 

SP-P/O MODE. For details, refer to

! SPEANA (spectrum analyzer)

 

SP-P/O MODE (rear output and preout set-

 

 

ting) on page 12.

Function settings

 

! SUB.W CTRL is not available when SUB.W is

 

selected in OFF. For details, refer to SUB.W

1

Press M.C. to display the main menu.

(subwoofer on/off setting) on page 10.

! SLA is not available when FM is selected as

 

 

2

Turn M.C. to change the menu option

the source.

 

and press to select FUNCTION.

 

FADER (fader adjustment)

 

 

3

Turn M.C. to select the function.

 

Once selected, the following functions can be

1

Press M.C. to display the setting mode.

2

Turn M.C. to adjust the front/rear speaker bal-

 

adjusted.

ance.

BALANCE (balance adjustment)

1Press M.C. to display the setting mode.

2Turn M.C. to adjust the left/right speaker bal- ance.

EQ SETTING (equalizer recall)

1Press M.C. to display the setting mode.

2Turn M.C. to select the equalizer.

POWERFUL—NATURAL—VOCAL—CUS- TOM1—CUSTOM2—FLAT—SUPER BASS The equalizer band and equalizer level can be customized when CUSTOM1 or CUSTOM2 is selected.

If selecting CUSTOM1 or CUSTOM2, complete the procedures outlined below. If selecting other options, press M.C. to return to the pre- vious display.

!CUSTOM1 can be set separately for each source. However, USB, iPod, PANDORA and APP are all set to the same setting au- tomatically.

!CUSTOM2 is a shared setting used in com- mon for all sources.

3Press M.C. to display the setting mode.

4Press M.C. to cycle between the following: Equalizer band—Equalizer level

5Turn M.C. to select the desired setting. Equalizer band: 80HZ—250HZ—800HZ— 2.5KHZ—8KHZ

Equalizer level: +6 to –6

LOUDNESS (loudness)

Loudness compensates for deficiencies in the low- frequency and high-frequency ranges at low vol- ume.

1Press M.C. to select the desired setting.

OFF (off)—LOW (low)—MID (mid)—HI (high)

SUB.W (subwoofer on/off setting)

This unit is equipped with a subwoofer output which can be turned on or off.

1Press M.C. to select the desired setting. NOR (normal phase)—REV (reverse phase)— OFF (subwoofer off)

SUB.W CTRL (subwoofer adjustment)

Only frequencies lower than those in the selected range are outputted from the subwoofer.

1Press M.C. to display the setting mode.

2Press M.C. to cycle between the following: Cut-off frequency—Output level—Slope level Rates that can be adjusted will flash.

3Turn M.C. to select the desired setting. Cut-off frequency: 50HZ—63HZ—80HZ— 100HZ—125HZ—160HZ—200HZ Output level: –24 to +6

Slope level: –12— –24

BASS BOOST (bass boost)

1Press M.C. to display the setting mode.

2Turn M.C. to select a desired level.

0 to +6 is displayed as the level is increased or decreased.

HPF SETTING (high pass filter adjustment)

Use this function when wanting to listen only to high-frequency sounds. Only frequencies higher than the high-pass filter (HPF) cutoff are output from the speakers.

1Press M.C. to display the setting mode.

2Press M.C. to cycle between the following: Cut-off frequency—Slope level

3Turn M.C. to select the desired setting. Cut-off frequency: OFF—50HZ—63HZ—80HZ

—100HZ—125HZ—160HZ—200HZ Slope level: –12— –24

10En