Section
02
Using this unit
Using radio text
Displaying radio text
You can display the currently received radio text and the three most recent radio texts.
1Press and hold down 
(list) to display radio text.
!When no radio text is received, NO TEXT ap- pears in the display.
2Turn LEVER left or right to recall the three most recent radio texts.
3Press 
or 
to scroll.
Storing and recalling radio text
You can store data from up to six radio text transmissions to the RT Memo 1 to RT Memo 6 keys.
1Display the radio text you want to store in the memory.
2Press 
(list).
The preset screen is displayed.
3Use LEVER to store the selected radio text. Turn it to change the preset number. Press and hold down M.C. to store.
4Use LEVER to select the desired radio text.
Turn it to change the radio text. Press M.C. to se- lect.
!The tuner automatically stores the three lat- est radio text broadcasts received, repla- cing the oldest text with the newest text.
Function settings
1Press M.C. to display the main menu.
2Turn M.C. to change the menu option and press to select FUNCTION.
3Turn M.C. to select the function.
Once selected, the following functions can be adjusted.
!If MW/LW band is selected, only BSM, Local and Tuning Mode are available.
BSM (best stations memory)
BSM (best stations memory) automatically stores the six strongest stations in the order of their signal strength.
1Press M.C. to turn BSM on. To cancel, press M.C. again.
Regional (regional)
When Alternative FREQ is used, the regional function limits the selection of stations to those broadcasting regional programs.
1Press M.C. to turn the regional function on or off.
Local (local seek tuning)
Local seek tuning allows you to tune in to only those radio stations with sufficiently strong signals for good reception.
1Press M.C. to display the setting mode.
2Press M.C. to turn local on or off.
3Turn M.C. to select the desired setting. FM: Level
The highest level setting allows reception of only the strongest stations, while lower levels allow the reception of weaker stations.
PTY search (program type selection)
You can tune in to a station using PTY (program type) information.
1Turn LEVER left or right to select the desired set- ting.
2Press M.C. to begin the search.
The unit searches for a station broadcasting that type of program. When a station is found, its pro- gram service name is displayed.
PTY (program type ID code) information is listed in the following section. Refer to PTY list on the previous page.
To cancel the search, press M.C. again.
The program of some stations may differ from that indicated by the transmitted PTY.
If no station is broadcasting the type of program you searched for, Not found is displayed for about two seconds and then the tuner returns to the original station.
Traffic Announce (traffic announcement standby)
1Press M.C. to turn traffic announcement standby on or off.
Alternative FREQ (alternative frequencies search)
When the tuner cannot get a good reception, the unit automatically searches for a different station in the same network.
1Press M.C. to turn the alternative frequencies search on or off.
News interrupt (news program interruption)
1Press M.C. to turn the NEWS function on or off.
12
En