90
ADJUSTMENTS
4. SCREEN ADJUSTMENTS
(1) Adjustment flowchart
The following shows the order for performing the adjustments generally required in the setup of this system.
For details, see the descriptions on the next page and later.
1Give ID (Refer to page 86 to 90)
↓
2Adjust the size of each screen
↓
3Adjust the convergence of each screen
↓
4Adjust the joining of the screens
(Adjust the MVP. Refer to “MVP Manual” in Chapter 7 (page 155).)
↓
5Check that there is no information missing and color deviation on the moving image.
If information is missing or color has deviated, return to 2 and readjust.
↓
6Adjust the white balance of each screen.
↓
7Adjust the ABL level
↓
8Check the ABL level and white balance using the video actually transmitted.
If there is deviation, return to 6 and readjust
↓
9Adjust the color tone using the video actually transmitted.
↓
0Recheck 6 to 8