Other Settings 11
67
En
LFE Attenuator Setup
• Default setting:
ATT 0 dB
Some Dolby Digital and DTS audio sources include ultra-
low bass tones. Set the LFE attenuator as necessary to
prevent the ultra-low bass tones from distorting the
sound from the speakers.
1 Select ‘LFE ATT Setup’ from the Other Setup
menu.
2 Choose the setting that you want.
•
ATT 0dB
– No limiting (recommended setting)
•
ATT 10dB
– 10dB of limiting
•
LFE OFF
– No sound from LFE channel
3 When you're finished, press RETURN.
You will return to the Other Setup menu.
SR+ Setup for Pioneer plasma displays
Make the following settings if you have connected a
Pioneer plasma display to this receiver using an SR+
cable. Note that the number of function settings available
will depend on the plasma display you’ve connected.
See also
Using this receiver with a Pioneer plasma display
on page 62 and
Using the SR+ mode with a Pioneer
plasma display
on page 63.
1 Select ‘SR+ Setup’ from the Other Setup menu.
2 Select the ‘PDP Volume Control’ setting you
want.
•
OFF
– The receiver does not control the volume of the
plasma display
•
ON
– When the receiver is switched to one of the
inputs that use the plasma display (
DVD/LD
, or
another one of functions below), the volume on the
plasma display is muted so only sound from the
receiver is heard.
3Assign any input source connected to the plasma
display to the corresponding input number.
This matches the receiver’s input source with a
numbered video input on the plasma display. For
example, assign
DVD/LD
to
input-2
if you have
connected the your DVD video output to video input 2 on
the plasma display.
• The
Monitor Out Connect
should be set to the input
that you’ve used to connect this receiver to your
plasma display.
4 When you're finished, press RETURN.
You will return to the Other Setup menu.
6. Other Setup
[ a. DRC Setup ]
[ b. Dual Mono Setup ]
[ c. LFE ATT Setup ]
[ d. SR+ Setup ]
6c. LFE ATT Setup
LFE ATT [ ATT 0dB ]
6. Other Setup
[ a . DRC Setup ]
[ b . Dual Mono Setup ]
[ c . LFE ATT Setup ]
[ d . SR+ Setup ]
6d. SR+ Setup
PDP Volume Control
[ OFF ]
PDP Input Select
DVD/LD [ OFF
]
TV/SAT [ OFF
]
DVR [ OFF
]
VIDEO1 [ OFF
]
VIDEO2 [ OFF
]
Monitor Out Connect
[ input-3 ]
6d. SR+ Setup
PDP Volume Control
[ ON ]
PDP Input Select
DVD/LD [ OFF
]
TV/SAT [ OFF
]
DVR [ OFF
]
VIDEO1 [ OFF
]
VIDEO2 [ OFF
]
Monitor Out Connect
[ input-3 ]
6d. SR+ Setup
PDP Volume Control
[ ON ]
PDP Input Select
DVD/LD [ input-2 ]
TV/SAT [ OFF
]
DVR [ OFF
]
VIDEO1 [ OFF
]
VIDEO2 [ OFF
]
Monitor Out Connect
[ input-3 ]
VSX_1015.book.fm 67 ページ ２００５年３月７日 月曜日 午後７時０分