Pioneer VSX-415, VSX-515 - page 17

Connecting up 03
17
En
English Français
Deutsch
Nederlands
Italiano Español
Important
• If you connect any source component to
the receiver using a component video
input, you must also have your TV
connected to this receiver's
COMPONENT
VIDEO MONITOR OUT
jacks.
1Connect the component video outputs of
your source to a set of component video
inputs on this receiver.
Use a three-way component video cable for the
connection.
2If necessary, assign the component video
inputs to the input source you've connected.
This only needs to be done if you didn’t connect
according to the following defaults:
•
COMP 1 – DVD
• COMP 2 – TV
See Assigning the component video inputs on
page 44).
3 Connect the COMPONENT VIDEO
MONITOR OUT jacks on this receiver to the
component video inputs on your TV or
monitor.
Use a three-way component video cable.
VSX_415-515.fm 17 ページ ２００４年１２月８日 水曜日 午後３時１２分