Using the XDJ-AERO as the VirtualDJ Pro 7
controller/audio output device
Installing the driver software
Install this unit’s driver software onto the computer from the CD-ROM included with this unit.
For installation instructions, see “Installing the driver software” in the XDJ-AERO’s operating instructions.
Connecting this unit and the computer
With this unit’s power turned on, connect this unit and the computer using a USB cable.
VirtualDJ Pro 7 settings
1 Open the Settings screen.

2 Make the audio output routing setting.
1
Click [Sound S etup].
2
Select as sho wn below from the [Sound card:] pull-down menu.
3
Select as sho wn below from the [Outputs:] pull-down menu.
To use this unit’s mixer section to mix the sound:
To mix the sound internally in VirtualDJ Pro 7:
3 Set up the options.
1
Click the [Options ] tab.
2
Click [Tooltips] an d select [Disable].
Launch VirtualDJ Pro 7, then click the [CONFIG] icon.