Chapter

02Basic operation

CAUTION

!Do not press the hbutton when an SD mem- ory card is not fully inserted. Doing so may da- mage the card.

!Do not press the hbutton before an SD mem- ory card has been completely removed. Doing so may damage the card.

1 Press the hbutton.

The “Monitor Setup” screen appears.

2 Touch [SD Insert].

The LCD panel opens, and the SD card slot ap- pears.

3Insert an SD memory card into the SD card slot.

Insert it with the label surface facing to the up- side and press the card until it clicks and com- pletely locks.

4Press the hbutton. The LCD panel closes.

p If data related to map data, such as custo- mized POI data, is stored on the SD mem- ory card, the navigation system restarts.

Ejecting an SD memory card (for AVIC-Z120BT)

pThis section describes operations for AVIC- Z120BT.

1 Press the hbutton.

The “Monitor Setup” screen appears.

2 Touch [Eject SD].

The LCD panel opens.

pTouch [Yes] if the message indicating that the flap opens after the navigation system restarts appears.

The navigation system restarts, and then the LCD panel opens.

3Press the middle of the SD memory card gently until it clicks.

16 En