
Chapter
31Customizing preferences
—AV1 and AV2
—SD and USB
!The different source volume level can be set between iPod and USB.
!When “Flat” is selected, no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between “Flat” and a set equalizer curve.
1Display the “AV Sound Settings” screen.
=For details, refer to Displaying the “AV Sound Settings” screen on page 171.
2Touch [EQ].
3Touch one of the keys to select a curve that you want to use as the basis of custo- mizing.
4Touch [Customize].
5Touch the frequency that you want to adjust the level.
6Touch [a] or [b] to adjust the level of the equalizer band.
Each time you touch [a] or [b], the level of the equalizer band increases or decreases.
2 Touch [Loudness].
Each time you touch [Loudness], the level is selected in the following order:
Off — Low — Mid — High
Using subwoofer output
The navigation system is equipped with a sub- woofer output mechanism, which can be turned on or off.
pThis function is not available when “Sub Woofer” is “Off”.
1Display the “AV Sound Settings” screen.
=For details, refer to Displaying the “AV Sound Settings” screen on page 171.
2Touch [Sub Woofer].
3Touch [On] to turn subwoofer output
on.
To turn subwoofer output off, touch [Off].
4Touch [Reverse] or [Normal] to select the phase of subwoofer output.
5Touch [+] or
“+6” to
Adjusting loudness
Loudness compensates for deficiencies in the low- and
1Display the “AV Sound Settings” screen.
=For details, refer to Displaying the “AV Sound Settings” screen on page 171.
6 Touch [c] or [d] next to
“Frequency(Hz)” to select
Each time you touch [c] or [d],
174 En