Chapter

04How to use the map

pThe map orientation is fixed at “North up” when the map scale is 25 miles (50 kilo-

meters) or more.

pThe map orientation is fixed at “Heading up” when the 3D map screen is displayed.

1Display the map screen.

2Touch on the map screen. or appears.

screen, with street name and other information for this location being shown. (The information shown varies depending on the position.)

pThe scrolling increment depends on your dragging length.

#Touch .

The map returns to the current position.

pPressing MODE button returns the map to the current position.

3Touch or to switch the vehicle’s direction.

Each time you touch the key changes that set- ting.

p If you do not operate the function for a few seconds, the initial map screen automati- cally returns.

Scrolling the map to the position you want to see

1Display the map screen.

2Touch and drag the map in the desired direction to scroll.

Setting the “Quick Access” menu

“Quick Access” menu allows you to perform various tasks, such as route calculation for the location indicated by the cursor or registering a location in [Favorites], faster than using the navigation menu.

You can customize “Quick Access” displayed on screen. The “Quick Access” described here are prepared as the default setting.

=For details, refer to Selecting the “Quick Ac- cess” menu on page 160.

pItems marked with an asterisk (*) cannot be removed from the Quick Access menu.

%When the map is displayed, touch .

1

2

1Cursor

2Distance from the current position Positioning the cursor to the desired location results in a brief informational overview about the location being displayed at the bottom of

Quick Access menu

: Route Options*

Displayed when the map is not scrolled. This item can be selected only during route gui- dance.

You can modify the conditions for route calculation and recalculate the current route.

=For details, refer to Modifying the route cal- culation conditions on page 42.

: Destination*

28 En