| Chapter |
Checking and modifying the current route | 08 |
Sorting waypoints
You can sort waypoints and recalculate the route.
pYou cannot sort waypoints that you have al- ready passed.
1Display the “Route Overview” screen.
=For details, refer to Displaying the “Route Overview” screen on page 42.
2Touch [Waypoints].
The “Waypoints List” screen appears.
3 Touch [Sort].
The “Sort Waypoints” screen appears.
4 Touch the waypoint or destination.
Put them in the desired order.
#Touch [Automatic].
You can sort the destination and waypoints auto- matically. The system will show the nearest way- point (distance in a straight line) from the current location as waypoint 1, and sort the other points (including your destination) in order of distance from the waypoint 1.
#Touch [Clear]. Waypoint sort is canceled.
5 Touch [OK].
The “Waypoints List” screen appears.
6Touch [OK] on the “Waypoints List” screen.
The route is recalculated, and the Route con- firmation screen appears.
7Touch [OK].
The map of the current position appears.
Canceling the route guidance
If you no longer need to travel to your destina- tion, follow the steps below to cancel the route guidance.
1Display the “Destination Menu” screen.
=For details of the operations, refer to Screen switching overview on page 22.
2Touch [Cancel Route].
A message confirming the cancellation of the current route appears.
3 Touch [Yes].
The current route is deleted, and a map of your surroundings reappears.
#Touch [Skip].
The next waypoint along the route is skipped. A new route to your destination through all remaining waypoints, except for the skipped way- point, is calculated.
When the route calculation is completed, Route confirmation screen appears.
p[Skip] is available only when a waypoint is set.
#Touch [No].
The previous screen returns without deleting the route. 
route current the modifying and Checking
En 
45