Pioneer Industrial VSX-94-TXH Setup

Setup

04 Chapter 4:

Setup

Setting up the network

In case the router connected to the LAN terminal on this

receiver is a broadband router (with the built-in DHCP

server function), simply turn on the DHCP server

function, and you will not need to set up the network

manually. You must set up the network as described

below only when you have connected this receiver to a

server without the DHCP server function. Before you set

up the network, consult with your ISP or the network

manager for the required settings. It is advisory that you

also refer to the operation manual supplied with your

network component.1

IP Address

The IP address to be entered must be defined within the

following ranges. If the IP address defined is beyond the

following ranges, you cannot play back audio files stored

on components on the network or listen to Internet radio

stations.

Class A: 10.0.0.1 to 10.255.255.254

Class B: 172.16.0.1 to 172.31.255.254

Class C: 192.168.0.1 to 192.168.255.254

Subnet Mask

In case an xDSL modem or a terminal adapter is directly

connected to this receiver, enter the subnet mask

provided by your ISP on paper. In most of the cases, enter

255.255.255.0.

Gateway IP

In case a gateway (router) is connected to this receiver,

enter the corresponding IP address.

DNS Server Preferred/DNS Server Alternate

In case there is only one DNS server address provided by

your ISP on paper, enter ‘DNS Server Preferred’. In case

there are more than two DNS server addresses, enter

‘DNS Server Alternate’ in the other DNS server address

field.

Proxy Hostname/Proxy Port

This setting is required when you connect this receiver to

the Internet via a proxy server. Enter the IP address of

your proxy server in the ‘Proxy Hostname’ field. Also,

enter the port number of your proxy server in the ‘Proxy

Port’ field.

Tip

•Press / or the numeric buttons to enter

alphanumeric characters. To delete alphanumeric

characters entered one at a time, press  or

CLEAR. ‘Cancel Key Editing Lose Changes?’

appears when you press RETURN or  while the

cursor is placed in the leftmost position on the

alphanumeric character entry screen. In this case,

press ENTER to exit from the screen and RETURN to

return to the screen.

1 Press

HOME MEDIA GALLERY

(press

iPod

while

you press and hold

SHIFT

) to select

HMG

as the input

source.

It may take several seconds for this receiver to access the

network. The following screen appears when the Home

Media Gallery is selected as the input source.

2 Select ‘

Setup

’ and press

ENTER

to confirm your

selection.

The

‘

Setup

’

screen appears.

Note

1 In case you make changes to the network configuration without the DHCP server function, make the corresponding changes to the network settings of

this receiver.

SLEEP

CLEAR

+10

SR+

ANALOG

ATT

DISC

DIMMER

CLASS

D.ACCESS

ENTER

TV CONTROL

DVD TV

BD TV

CTRL

DVR1

INPUT

i Pod

TUNER

RECEIVER

ENTER

A PARAMETER

TOP MENU 

V PARAMETER

MENU T.EDIT

BAND

PROGRAM

GUIDE

RETURNRETURN

SETUPSETUP