PIONEERPOS G24-LC manual +CMGW, Write Message to Memory, 63 +CMGW Parameters, Pdu

Chapter 3: AT Commands Reference

+CMGW, Write Message to Memory

This command is used to write and save a message to <mem2>. The message is saved in memory, and the message index is displayed to the user.

By default, messages are saved with the status of "STO UNSENT", but status "STO SENT" can be applied using the <stat> parameter.

In TEXT mode, the header parameters will be set according to CSMP settings.

Command	Syntax	Response/Action	Remarks
Type
Set	If text mode (+CMGF=1):	+CMGW: <index>	The Set command
	+CMGW[=<da>[,<toda>[,<stat>]]]<CR>te	or:	writes a message
	xt is entered<ctrl-Z/ESC>	+CMS ERROR: <err>	and stores it.
	if PDU mode (+CMGF=0):
	+CMGW=<length>[,<stat>]<CR> PDU is
	given<ctrl-Z/ESC>

The following table shows the +CMGW parameters.

	Table 3-63: +CMGW Parameters
<Parameter>	Description
<da>	Destination address in quoted string. This field contains a single phone number.
<toda>	Type of DA. Value between 128-255 (according to GSM 03.40, 9.1.2.5). If this field is
	not given and first character of <da> is '+' , <toda> will be 145, otherwise 129.
<stat>	Status of new message
	In text mode: “STO UNSENT” (default) or “STO SENT” In PDU mode: 2 (default)
	or 3
<length>	Size of message in PDU mode fromat, in octects, excluding SMSC data.
<index>	1-352 Index in storage of the stored message.
<PDU>	Message header andcontents in PDU mode format. See description in the tables
	below.

April 15, 2008 G24-L AT Commands Reference Manual 3-103