PG14D: Floor Model Gas Pasta Cooker OPERATION
17
Typical Timer Buttons*
2.4. COOKING
It is important to keep the cook tank full of water to minimize the chance of boiling the appliance dry
and to keep the water at a level that will provide optimum cooking performance. To keep the water at
its normal operating temperature, it is best to add water in small amounts. If the appliance is
equipped with manual water fill, it is recommended that the fill knobs are set so that water enters the
tank slowly during cooking.
2.4.1. SIMMER MODE
Simmer mode maintains the water temperature to just below boiling. This mode can be used to
reheat pasta or as a “stand by” mode.
To enter simmer mode:
Models with electric thermostat: Press the boil/simmer switch to the simmer position.
All other Models: Press the * button until * is displayed.
If you are not ready to cook, enter simmer mode. This will conserve energy and keep water in the
tank longer then when in boil mode.
2.4.2. BOIL MODE
Boil mode consistently heats the water so that the water will boil. Once the water starts to boil the
appliance is ready to cook pasta.
To enter boil mode:
Models with electric thermostat: Press the boil/simmer switch to the boil position.
All other Models: Press the * button until * is displayed.
2.4.3. TIMER OPERATION
Not all control types include timers. Timers provide accurate cook times for multiple product
quantities and types. Refer to the operator’s manual for your appliance’s specific control type to
determine how to set the cook timers if equipped.
To start a timer: Press the appropriate timer button.
2.4.4. BASKET LIFT OPERATION
If the appliance is equipped with basket lifts, place the pasta basket onto the basket lift prior to
starting the timer(s). The basket(s) will be lowered into the cook tank when the timer cycle starts.
At the end of the preset cooking time, the basket lift will raise the basket out of the cook tank.
2.4.5. ADDITIONAL CONTROLLER FUNCTIONS
Some controllers have additional functions not described in this manual. If your appliance’s
controller has additional functions, refer to the controller’s operation manual to access these
functions.
*The specified buttons and/or displays may appear slightly different then shown. Refer to
the operator’s manual for your appliance’s specific control type to determine the exact
appearance of each button and display.
WARNING
Dry fired heat tubes are extremely hot, will shorten its service life and may void your warranty.