Planar PJT195RW Touch Screen Driver Installation

Touch Screen Driver Installation

The PJT155R/ PJT175R/ PJT195RW is available with USB connection. The touch software is located on the

enclosed CD-ROM for these operating systems: Windows® 7, VISTA, XP, 2000, ME, 98, NT4.0, CE, XP Embedded,

Linux, Apple® Mac OS

compatible if you use the USB touch screen interface. No additional software driver is required for general

operation of the touch screen. A calibration tool can be installed for improved touch position accuracy. The

calibration tool supports Windows® 7, VISTA, XP, XP Embedded, and 2000 operating systems via USB only.

The PJT155R/ PJT175R/ PJT195RW is available with USB connection. The touch driver is available online for

these operating systems: Windows® 7, VISTA 64/32 bits, XP, 2000, ME, 98, NT4.0, CE, XP Embedded, Linux,

Apple® Mac OS.

Please Note: The PJT155R/ PJT175R/ PJT195RW is Microsoft® Windows® HID (Human Interface Device)

compatible if you use the USB touch screen interface. No additional software driver is required for general

operation of the touch screen. A calibration tool can be installed for improved touch position accuracy. See

“Optional Calibration Tool Install” section for more information.

If you would like to use the Optional Calibration Tool, follow the instructions below. Please note: the

calibration tool supports Windows® 7, VISTA, XP, XP Embedded, 2000, 98 and ME operating systems via USB

only.

1. Download the calibration tool online.

2. Execute the calibration tool.

3. From here the user can choose to do the following:

a. 4 Points Calibration

b. 9 Points Linearization

c. 25 Points Linearization

d. Clear

e. Draw Test

f. Advanced. In the Advanced settings area the user may do the following:

i. Adjust the Double Click Area.

ii. Enable auto right click and adjust the auto right click time.

iii. Choose to be either in the HID Mouse Mode or HID Digitizer Mode

(Windows® 7, Vista).

iv. Simply click the “Apply” button once the settings are finalized.