Adjusting Monitor Settings

Use the OSD to easily adjust the screen image based on your viewing preferences.

Note:You must perform Auto setup before making any adjustment.

Note:For the best display performance, it is strongly recommended that you use Auto setup to automatically configure your monitor’s settings.

OSD Main Menu

To display the OSD Main Menu, press the Select button.

The following table briefly describes each of the items in the OSD Main Menu.

Item

Description

Auto setup

Automatically configure the monitor’s settings. See “Auto setup”

 

on page 9.

Management

Open the Management sub-menu where you can select

 

Brightness, Contrast or the image position for further

 

adjustment. See “Management Sub-menu” on page 10.

Clock/Phase

Open the Clock/Phase sub-menu where you can select Clock or

 

Phase for further adjustment. See “Clock/Phase Sub-menu” on

 

page 11.

Color

Open the Color sub-menu where you can select Color Temp,

 

Black Level Adjust and RGB Adjust for further adjustment. See

 

“Color Sub-menu” on page 12.

OSD Display

Open the OSD Display sub-menu where you can select H.

 

Position or V. Position of the OSD display for further

 

adjustment. See “OSD Display sub-menu” on page 13.

Factory Recall

Restore the factory default setting values. See “Factory Recall” on

 

page 13.

Language

Open the Language sub-menu where you can select one of the

 

five languages for your preference in displaying the OSD

 

messages. See “

 

Language Sub-menu” on page 14.

Exit

Clear and exit the OSD Main Menu. See “

 

Exiting OSD” on page 15.

Selecting Items in OSD

To select items in the OSD Main Menu, use the Up (△) or Down (▽) buttons on the front panel of the monitor.

To select items in the OSD sub-menus, use all three, control buttons. Use the Up (△) or Down (▽) buttons to move to a specific item, and accept the selection by pressing the Select button.

8