Chapter 2
9
No Signal coming…
When the monitor is ON and there is no Video signal received, the monitor will enter the po wer saving mode. Check
the video cable connection.
Signal out of monitor’s supported range
When the either the display resolution or refresh rate is beyond the capabilities of the monitor, a signal over rang e
message appears. When the signal is over range, the image will not be centered and the warning message appears.
Users can pan the display picture with the ▲ / ▼ / / keys. After image adjustment, you should be able to change
the settings that provide for a properly displayed image. Consult the appendix for supported resolutions and refresh
rates.
L
OVER RANGE!
FUN/ADJ KEY
→
H-POSITION
→
V-POSITION
NO SIGNAL COMING…
CHECK SIGNAL CABLE
MONITOR WILL ENTER
POWER SAVING MODE