FGSW-2620VM / FGSW-2624SF User’s Manual

4.2.5.3 Aggregator State Activity

When you had setup the LACP aggregator, you can configure port state activity. You can mark or un-mark the port.

 

Figure 4-2-8Trunking – State Activity interface

 

 

Object

Description

 

 

Active

The port automatically sends LACP protocol packets.

 

 

Passive

The port does not automatically send LACP protocol packets, and responds only if

 

it receives LACP protocol packets from the opposite device.

 

 

Apply button

Press the button to change the port state activity. Opposite is Passive.

 

 

1.A link having either two active LACP ports or one active port can perform dynamic LACP trunking.

2.A link has two passive LACP ports will not perform dynamic LACP trunking because both ports are waiting for and LACP protocol packet from the opposite device.

3.If you are active LACP's actor, when you are select trunking port, the active status will be created automatically.

38