Reset Button

Reboot the Print server:

1.Verify the power of print server is turned on.

2.Press the reset button once, and then release it.

WARNING: This will restart the print server and stop all on-going and pending print jobs!

Perform a Factory Default:

1.Disconnect the external power adapter.

2.Hold down the reset button.

3.Reconnect the external power adapter. Wait about 5 seconds.

4.Release the reset button.

5.The print server will restart.

WARNING: This will erase all settings of print server to default and should be performed with caution!

After performing a factory default, the default settings will be:

zDHCP client: off

zIP address: 192.168.0.10 Subnet Mask: 255.255.255.0

79