A list of all the NAS-7100s on your network will show on the left side. The right side displays details of the currently selected NAS-7100.

If the desired NAS-7100 is not listed, check the following:

•The NAS-7100 has finished the start up and boot process.

•Your PC and the NAS-7100 are on the same IP segment.

•Click “Refresh” button to search again.

Otherwise, select the desired NAS-7100, and click the "Next" button.

4.The following screen will then be displayed. You can set the IP settings in this screen. Please click “Next” after the configured.

Obtain an IP address

automatically (DHCP Select this only if your LAN has a DHCP Server.

Client)

 

This option is recommended. You need to enter the

 

following data.

 

• IP address - The utility will suggest a unused IP

 

address within the address range used on your

Fixed IP Address

LAN. If you wish, you can change this, but you

must ensure the address is unused.

 

 

• Network Mask - This must match the value used

 

by PCs on your LAN.

 

• Gateway - This must match the value used by PCs

 

on your LAN.