Polycom 3725-76302-001LI Juniper Networks SRC Integration

Juniper Networks SRC Integration Integrations with Other Systems
Polycom, Inc. 189
4When asked to confirm that you want to join, click Yes.
The system connects to the Polycom RealPresence Resource Manager or
CMA system, establishes the integration, and obtains site topology and
user-to-device association data (this may take a few minutes). A dialog
box informs you when the process is complete.
5On the Resource Management System page, verify the integration
information.
6Go to Network > Site Topology > Sites, and from there to the other site
topology pages, to see the site topology information obtained from the
Polycom RealPresence Resource Manager or CMA system.
To terminate the integration with a resource management system
1Go to Admin > Integrations > Resource Management System.
2In the Actions list, select Leave Resource Management System.
3When asked to confirm that you want to leave, click Yes.
The system connects to the Polycom RealPresence Resource Manager or
CMA system and terminates the integration. A dialog box informs you
when the process is complete.
4On the Resource Management System page, verify that the system is no
longer integrated with the Polycom RealPresence Resource Manager or
CMA system.
The Polycom DMA system retains the site topology and user-to-device
association information last obtained from the RealPresence Resource
Manager or CMA system, but it’s now editable.
See also:
“Integrations with Other Systems” on page163
“Resource Management System Integration” on page 185
“Resource Management System Page” on page 186
“Join Resource Management System Dialog Box” on page187
Juniper Networks SRC Integration
You can integrate the Polycom DMA system’s Call Server with a Juniper
Networks SRC Series Session and Resource Control module to provide
bandwidth assurance services. This allows the DMA system to consult a
configured policy on the Juniper SRC system at call time to assure and/or
reserve required network resources for a call. It also allows priority and
preemption policies to be applied to DMA system calls.