
Programming
2-2 
NOTE:
ACS Release 3.0 includes a PARTNER Remote Access PC Card, which 
allows the user to administer the system remotely1 and  perform backup and 
restore functions. The PARTNER Remote Access PC Card is a PCMCIA 
card, which can also be used to upgrade previous versions of PARTNER 
ACS to Release 3.0.
!WARNING:
Remove all other PC Cards from the processor before initiating an upgrade.
This chapter provides general information about programming procedures. When 
a specific feature name is used, it is printed in bold type. For detailed descriptions 
and step-by-step instructions, refer to that name in Chapter 5. (A Programming 
Quick Reference is provided at the end of this book.) 
Hardware Considerations 
Programming procedures use line and extension numbers. The line nu mber 
represents the line jack on a 200, 206, 308EC, or 400 module or an ACS 
processor module to which the outside line is connected. Similarly, the extension 
number represents the extension jack on a 206 or 308EC module or an ACS 
processor module to which the system phone or standard device is co nnected. 
For the 200 module, the system assigns two lines.
For each 206 module, the system assigns two lines and six extensions ; for the 
308EC or ACS processor module, the system assigns three lines and eight 
extensions; for each 400 module, the system assigns four lines. The system  
numbers lines and extensions consecutively from left to right in a 2-S lot carrier, 
beginning with the ACS processor module in the leftmost slot; in a 5-Sl ot carrier, 
the numbering also begins with the ACS processor module (in the center slot),  
and then moves to the 
leftmost 
module and continues consecutively from left to 
right. 
Figure 2-1 shows the numbering scheme for a PARTNER ACS stand-alone 
configuration, for a 2-Slot carrier, and for a 5-Slot carrier, each with the system 
configured for maximum 
lines
. Figure 2-2 shows the numbering scheme for a 
PARTNER ACS stand-alone configuration, for a 2-Slot carrier, and for a 5-Slot 
carrier, each with the system configured for maximum 
extensions
. However, your 
system can have any number of lines or extensions up to the maximum. 
1. Additional PARTNER Remote PC-Software required.