STORAGE

Immediately prepare your unit for storage at the end of the season or if the unit will not be used for 30 days or more.

WARNING: Never store the snow thrower with gasoline in the tank inside a building where fumes may reach an open flame, spark or pilot light as on a furnace, water heater, clothes dryer or gas appliance. Allow the engine to cool before storing in any enclosure.

SNOW THROWER

When snow thrower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

1.Clean entire snow thrower (See “CLEANING” in the Maintenance section of this manual).

2.Inspect and replace belts, if necessary (See “TO RE- PLACE BELTS” in the Service and Adjustments section of this manual).

3.Lubricate as shown in the Maintenance section of this manual.

4.Be sure that all nuts, bolts, screws, and pins are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

5.Touch up all rusted or chipped paint surfaces; sand lightly before painting.

ENGINE

See engine manual.

FUEL SYSTEM

IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as carburetor, fuel hose, or tank during storage. Also, alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage.

•Empty the fuel tank by starting the engine and letting it run until the fuel lines and carburetor are empty.

•Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

•Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in min- imizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do not drain the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean en- gine oil. (See “ENGINE” in the Maintenance section of this manual).

CYLINDER

1.Remove spark plug.

2.Pour one ounce (29 ml) of oil through spark plug hole into cylinder.

3.Pull recoil starter handle slowly a few times to distribute oil.

4.Replace with new spark plug.

OTHER

•Remove safety ignition key; store it in a safe place.

•Do not store gasoline from one season to another.

•Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

•If possible, store your snow thrower indoors and cover it to protect it from dust and dirt.

•Cover your snow thrower with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe, which allows condensation to form and will cause your snow thrower to rust.

IMPORTANT: Never cover snow thrower while engine/ exhaust area is still warm.

18

Page 17 Page 19
Page 18
Image 18
Poulan 428707, 96194000801 owner manual Storage, Other, Fuel System, Engine OIL, Cylinder
Page 17 Page 19

96194000801, 961940008, 428707 specifications

The Poulan 428707,96194000801,961940008 is a powerful and versatile outdoor power tool designed for landscaping and yard maintenance. This model impresses with its robust features, advanced technologies, and user-oriented characteristics that cater to both professional landscapers and DIY enthusiasts.

One of the standout features of the Poulan 428707 is its potent engine, designed to deliver reliable performance for a variety of outdoor tasks. The engine's efficiency enables it to tackle demanding jobs such as trimming, edging, and clearing debris, making it an essential tool for maintaining a pristine lawn or garden. The lightweight design of the equipment enhances maneuverability, ensuring that users can easily navigate tight spaces and complex terrains without straining themselves.

In terms of technology, the Poulan 428707 incorporates low-emission capabilities that are compliant with environmental regulations. This means that users can enjoy the powerful performance of the tool while minimizing their environmental footprint. The ergonomic design is another notable technological advancement; it features comfortable grips and adjustable handles, allowing users to work for extended periods without discomfort or fatigue.

The Poulan 428707 is equipped with a range of cutting attachments, offering versatility for different tasks. Whether you need to cut through thick brush or perform delicate trimming, this tool can adapt to meet your needs. The easy-to-use system for swapping out attachments further simplifies the process, making it user-friendly for those who may not have previous experience with such equipment.

Durability is a key characteristic of the Poulan 428707, as it is constructed from high-quality materials designed to withstand wear and tear. This durability ensures longevity, providing users with a reliable tool that can handle seasonal demands year after year.

Overall, the Poulan 428707,96194000801,961940008 stands out as a top choice in outdoor power tools due to its functionality, innovative technologies, and robust build quality. Its combination of power, efficiency, and user-friendly design makes it an indispensable addition to any outdoor maintenance arsenal, positioning it as a leading option for individuals looking to enhance their landscaping capabilities. Whether you're maintaining your home garden or managing larger landscaping projects, this tool will help you achieve professional results with ease.
Top Page Image Contents