QuickDraw®
WATER WITH
WARNING: Make sure valve is piped to a proper drain per instructions. Scalding injury and/or water damage can occur from either the manual lifting of the lever or the normal operation of valve if it is not piped to a proper drain. Insure that the safety relief valve piping is of the proper material and rating for the temperature and pressure of the system and that it is secured to prevent possible injury. If valve fails to flow water or reseat, consult the factory.
CAUTION: The relief valve is a primary safety device.
3.The temperature limiting device and thermostat sensors that extend into the water in the tank may become coated with scale, depending on the type of water in your area. This coating will affect the accuracy of the sensors and can allow the water temperature to exceed the desired limits. They should be removed from the tank and inspected at intervals. Remove scale if present.
CAUTION: On control systems using 120 volt external power, be certain switch is off, and power disconnected to avoid electrical shock before work is performed on this heater.
Since PVI cannot control the use of the water heater, water conditions, or maintenance, the warranty on the water heater does not cover poor performance, structural failure, or leaking due to an excessive accumulation of scale.
4 | Section 24 |