3. Basic Operation

Initial Setup

After the install connections have been made, and the unit has been powered up, a blue screen should be seen on the monitor screen. Pressing the MENU button on the remote control should display the main menu on the screen, as shown in Figure 1 below. In this User Guide describes the procedures for basic TV operations such as scanning for channels, changing channels, language control, and information display.

Figure 1. Main Menu

Basic Operation

This chapter will describe the steps required for basic operation of the DTV box, including performing the initial channel scan, changing channels, language control, and information display. Please refer to Page 5 for a description of the DTV box remote control button functions.

Initial Channel Scan

1.To perform a channel scan when the input is from a terrestrial antenna, click the MENU button on the DTV remote control, and using the navigation buttons, highlight the Channel menu button and select it by pressing the ENTER button. Select the Auto Program sub-menu, then select Yes in the Warning text window, as shown in Figure 2 below.

Figure 2. Auto Program Sub-Menu

8