AT Command Reference
80-99208-1 Rev. D 6-57
Results Returned
SMS Alert ($QCSMSA)Syntax
$QCSMSA[=<alert>|?| =?]
Description
This command sets whether the DTE is “alerted” of the
arrival of a new SMS message. This “Alert” takes the form of
sending an unsolicited result code (SMS ) out the Rm interface
to the DTE (much the same as a RING indication for incoming
calls). The destination port f or the SMS result code is the active
AT command port.
Values
Default Value
0
Power-On Default
0
Results Returned
Result Code Description
OK The requested operation was successful.
ERROR If an illegal value is detected or any error
associated with changing the value of the LOCK
flag.
0Asynchronous messaging will be turned OFF.
1Asynchronous messaging will be turned ON.
Result Code Condition
OK <alert> is recognized and supported.
ERROR <alert> is not supported and ignor ed.