8-IN-ONE REMOTE POWERED BY KAMELEON

PROGRAMMING A DEVICE

The RadioShack 8-in-One Remote is preset at the factory to operate the following devices:

•Motorola Cable Box

•RCA TV, VCR, DVD Player, Satellite Receiver, CD Player, and Audio Receiver

•ReplayTV PVR (DVR) using the AUX key

To control devices other than the default brands, perform the following steps; otherwise skip this section:

NOTE: To control a DVD Player/VCR Combo, perform the instructions in “Programming A DVD Player/VCR Combo” on page 16.

1.Turn on a desired device (e.g.,VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc).

NOTE: Please read steps 2 through 9 completely before proceeding. Before starting step 2, review the “Manufacturer’s Codes” (starting on page 118). Brands are listed alphabetically in order of the most popular codes first.

Highlight or write down the devices and the codes you wish to program.

2.Press and hold P until the bottom IR segment flashes twice. The program keys will appear:

NOTE: If the display turns off due to inactivity, the remote will exit programming and return to the last-selected device menu screen. To start programming

again, repeat this step. To stop programming at any time, press once to

return to the program keys screen. Press once more to exit completely.

3.Press above DEV SET once. The Device Setup programming screen will appear:

14Programming A Device