OWNER’S MANUAL
•Broken or defective product.
•Products that operate over 100 kHz.
•Infrared keyboards a nd infrared pointing devices (such as mouse substitutes).
•All products for sale and/or use outside the continental United States, Hawaii, Alaska, or Canada.
TROUBLESHOOTING
PROBLEM: | No display at all times. |
SOLUTION: | Replace batteries with four new AAA alkaline batteries. |
PROBLEM: | No display when programming. |
SOLUTION: | Display has turned off due to inactivity. Start programming |
| again and do not pause while performing instructions. |
PROBLEM: | Remote Finder does not work. |
SOLUTION: | Replace battery with new |
| verify Finder Receiver is enabled (see page 39). |
PROBLEM: | During programming, the bottom IR segment displays a |
| long flash. |
SOLUTION: | An invalid entry has occurred. Check the keys to be |
| pressed and start program again. |
PROBLEM: | How do I stop programming? |
SOLUTION: | Press once to return to the program keys screen. |
| Press it once more to exit completely. |
PROBLEM: | The unit does not control home entertainment devices |
| or commands are not working properly. |
SOLUTION: | Try all listed codes for the device brands being set up. |
| Make sure they can be operated with an infrared |
| remote control. |
PROBLEM: | Tried Searching For Your Code method and still could |
| not find a working code. |
SOLUTION: | Perform Restoring Factory Default Settings on page 40. |
| Then repeat Searching For Your Code on page 17. |
PROBLEM: | Cannot program a macro onto M1~ M4, PWR, or COM |
| MUTE keys. |
SOLUTION: | Make sure the total number of key presses being |
| programmed is less than 15. |
| continued on next page... |
Upgrade Exclusions/Troubleshooting 43