DRIVER INSTALLATION
The Windows 98SE, 2000, ME, or XP operating systems have the required software driver for operating the USB
WINDOWS 98SE
1.Add New Hardware Wizard dialog box appears. Click Next.
2.Click Search for the best driver for your device. (Recommended).
3.Click Specify a location for your target drive, and then click Next.
4.Windows is now ready to install the best driver for this device appears. Click Next.
5.Windows has finished installing the software appears. Click Finish to complete installing the driver.
Under Device Manager, click View device by type. You will see Generic USB Hub on USB 2.0 Bus. under Universal Serial Bus Controllers.
WINDOWS 2000
1.Found New Hardware Wizard dialog box appears. Click Next.
2.Click Search for the best driver for your device. (Recommended).
3.Click Specify a location for your target drive then click Next.
4.Windows found a driver for this device appears. Click Next to install the driver.
5.Windows has finished installing the software appears. Click Finish to complete installing the driver.
Under Device Manager, you will see Generic USB Hub on USB 2.0 Bus under Universal Serial Bus Controllers.
WINDOWS ME
As soon as you install the USB hub, Windows automatically installs the hub’s driver.
WINDOWS XP
THE FCC WANTS YOU TO KNOW
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult your local RadioShack store or an experienced radio/TV technician for help.
If you cannot eliminate the interference, the FCC requires that you stop using your radar detector.
Changes or modifications not expressly approved by RadioShack may cause interference and void the user’s authority to operate the equipment.
OVER CURRENT PROTECTION
When power is securely connected, the red POWER LED and the green port LEDs light. In cases of excessive current, the hub’s over current protection automatically disconnects power from the related port and that port’s green POWER LED goes off. You can reset the USB hub by unplugging the USB cable and then plugging it back in, or by clicking RESET if your operating system sends you an error message.Ó
Ó HINT Ó
•If the AC adapter is disconnected from the AC outlet during operation or the USB device draws too much current or shorts, the affected port’s light goes out, and Windows sends you a “USB Hub Current Limit Exceeded” message. To reset the port, unplug the device from the affected port and click Reset on the error message on the screen. (Do not click Close or the hub will no longer function.) The port’s indicator lights. You can now reconnect a device to the port.
•If your operating system does not display an error message, you can reset the port by unplugging the device from the port then unplugging the hub from your PC. Plug the hub back into your PC and then plug the device back into the port. The port’s indicator lights.
CARE
Keep the USB hub dry; if it gets wet, wipe it dry immediately. Use and store the USB hub only in normal temperature environments. Handle the USB hub carefully; do not drop it. Keep the USB hub away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new.
Modifying or tampering with the USB hub’s internal components can cause a malfunction and might invalidate its warranty and void your FCC authorization to operate it. If your USB hub is not performing as it should, take it to your local RadioShack store for assistance.
1.Found New Hardware Wizard dialog box appears. Click Install the software automatically (Recommended), then click Next.
2.Generic USB Hub on USB 2.0 Bus has not passed Windows logo testing appears. Click Continue Anyway.
3.Click Specify a location for your target drive, then click Next.
4.Windows has finished installing the software appears. Click Finish to complete installing the driver.
5.Under Device Manager, you will see Generic USB Hub on USB 2.0 Bus under Universal Serial Bus Controllers.
FCC DECLARATION OF CONFORMITY
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
|
|
|
|
| Product: | High Speed Hub |
|
| Model: |
| |
| Responsible Party: | RadioShack |
|
|
| 100 Throckmorton |
|
|
| Fort Worth, TX 76102 |
|
| Phone: |
| |
|
|
|
|
|
|
|
|
Limited
This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for ninety (90) days from the date of purchase from RadioShack
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
In the event of a product defect during the warranty period, take the product and the RadioShack sales receipt as proof of purchase date to any RadioShack store. Ra- dioShack will, at its option, unless otherwise provided by law: (a) correct the defect by product repair without charge for parts and labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase price. All replaced parts and products, and products on which a refund is made, become the property of Ra- dioShack. New or reconditioned parts and products may be used in the performance of warranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, accident, misuse, improper or abnormal usage, failure to follow instruc- tions, improper installation or maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs of product re- moval, installation,
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102
12/99
SPECIFICATIONS
USB Specifications ................................................. | USB Revision 2.0 and 1.1 |
Operating System ............................ | Microsoft Windows 98SE, 2000, ME, XP |
Data Speed ...................................................... | Low: 1.5 Mbps, Full: 1.2 Mbps |
| High: 480 Mbps |
Downstream Port ................................................... | USB A Type Receptacle 4 |
LED Indicators .................................. | Power ⋅ 1 (Red) USB Ports ⋅ 4 (Green) |
Enclosure .................................................................................... | Plastic (ABS) |
Power Adapter ........................................................................ | DC 5V/2.5 Amp |
Operating Temperature ............................................ | 32° to 104°F (0° to 40°C) |
Storage Temperature ......................................... | |
Operating Humidity .......................................................................... | 10 to 80% |
Storage Humidity ............................................................................... | 5 to 90% |
Weight ....................................................................................... | 1.66 oz (47 g) |
Dimensions ................................................. | 3 1/16 in. ⋅ 1 in. (7.8 cm ⋅ 2.5 cm) |
Accessories .................................................................................. | AC Adapter |
Specifications are typical; individual units might vary. Specifications are subject to change and improvement without notice.
© 2003 RadioShack Corporation. All Rights Reserved. | 03A03 | |
RadioShack and RadioShack.com are trademarks | ||
Printed in China | ||
used by RadioShack Corporation. |